The Etek3 LT is the Etek3 base model, and will feature composite parts for the first time on an Eclipse marker. The composite parts are manufactured from Glass Reinforced Nylon (GRN), a very durable material that is both tough and rigid. The GRN parts found on the Etek3 LT are the frame, eye covers and lever-locking clamping feedtube assembly. All other parts of the Etek3 LT are manufactured from exactly the same materials and finishes you will find on the Ego10 and SL range - high grade aluminum and stainless steel, deep cosmetic and industrial hard anodizing. No corners are cut in the manufacturing of the Etek3.

Features:

• Eclipse Etek3 LT paintball marker
• One Piece Body - FRM is integrated into the body for reliability and robustness
• Deftek Feed - slightly offset to one side to prevent bouncing, breaks and chops
• Smaller Rammer Housing - rear bottom tube is smaller, allowing the gun to be more compact
• Zick Kit - reduces kick and softens initial impact on the ball during loading
• Cure Bolt - bolt is standard, along with a body-contoured rear cut that allows the bolt to blend seamlessly into the marker body; lessens breaks that happen due to the bolt clipping balls in the feed stack
• Direct Mounted Solenoid - molded solenoid minifold mounts the SMC solenoid directly to the marker body, adjacent to the rammer; now just a single hose taking LP air from the LPR to the Minifold, which is filtered for protection from debris
• S3 Inline Regulator - features a self-purging device to ensure the valve chamber is left empty once tank is removed; coil spring construction for quick and simple maintenance with no washer or shim stack to lose or incorrectly assemble
• Adjustable LPR - precise control of LPR pressure without the risk of accidental over-pressurization of solenoid or rammer
• Fully Adjustable Trigger - self-lubricating trigger holder neatly clips into the frame; combined with magnetic trigger return it creates smooth, positive trigger feel; adjustable for fore and aft stop as well as magnetic return strength
• 2-Piece Barrel - 14" 2-piece honed barrel with distinct Eclipse Reverse Threading, making the Etek3 barrel upgradeable with Shaft3 Upgrade pack; 0.693" rear bore is standard
• Break Beam Sensor System - ensures excellence at preventing chopped balls in the breech; when enabled, it will only fire once a ball has loaded into the breech; if BBSS system sees any kind of fault, software automatically overrides and marker continues to fire at a greatly reduced rate
• LED Board - 3 true color indicators; allows easy programming of all the user definable parameters by greatly simplifying the programming process; top LED indicates 10s of units, middle displays 1s and bottom shows 0.1 increments
• Programmable Firing Modes - user definable settings for Dwell, Ball-in-Place, Eyes Off ROF, Cap ROF (uncapped in Semi 1), Debounce, and Firing Mode; has the capability to be set to cover every current tournament regulation
• Soft Grips - follow the same design as Geo and Ego grips; comfortable, slim, grippy and soft
• OOPS - the same On/Off/Purge System (OOPS) as the Ego10; easy to maintain, easy to turn and dumps air from the marker when turned off; mounts to the bottom of the Etek3 frame using robust T-Rail slide system