The Vortex Mod is hard-coated and teflon coated aluminum internals that replace the stock plastic internals of the Tippmann Cyclone Feed.
With the recent release of high-end electronic boards for the Tippmann A5 and 98 Pro E that allow for rates of fire of up to 30 BPS, has come the need for higher performing internals for the cyclone feed.
Our testing has shown that the Vortex Mod will allow the Cyclone feed to work at lower pressures, feed faster, and last longer than the stock internals.
While stock cyclone internals need to be replaced on a regular basis, the Vortex Mod is a permanent solution that makes the cyclone into the fastest, and most reliable loader available.
The Vortex Mod will feed upwards to 25-26 balls per second and continue to load down to pressures as low as 200psi.
Stock parts only feed up to 15 balls per second and only down to a pressure of 400 psi.
