Dead On ProSeal
Dead On Paintball has improved on the stock Tippmann power tube and front bolt. It's very smooth because of a precision Teflon insert running on a precision CNC machined billet power tube. This upgrade will improve air efficiency and should increase cycle rate. This is Response Trigger ready.
Dead On Double Trigger
Shoot faster with two fingers. This kit pops right into the A5. Includes tournament legal trigger guard. Use this kit for an insane rate of fire. 100% drop-in accessory.
Dead On Rear Velocity Adjuster
Try this option for fast, trouble-free installation of the A-5 RVA. All you have to do is pull out the two pins, slide out the stock end piece on your A-5, slide this RVA in and re-insert the pins. It's simple and will take less than a minute.
Dead On Bullet Drop - Black
Designed for the CO2 20oz, nitro or HPA player. The player that needs the big drop for the big tank. It moves your tank 5 1/2 inches forward and 2.5 inches down. It also includes an ASA with a hole for a gauge if you need it. (The hole is plugged when you get it. You can either leave the plug in, or remove the plug to install a gauge.) It has holes drilled to mount on standard OR Spyder bottomlines. Will work with all CO2 tanks and screw-in nitrogen tanks
This design has the On/Off valve with degassing feature. As you loosen the knob it will empty your gun (but not your tank) of air so that you can unscrew your tank and not have to worry about residual trapped air or pulling the trigger to rid your gun of the air. No more torn up tank o-rings.
Vertical Adapter
The Tippmann vertical adapter is made from machined brass and copper tubing. The adapter consists of the tank adapter, gas line, and valve fitting. These three pieces are soldered together to give you a lifetime of worry free performance.
Gas Thru Grip or Expansion Chamber
Expansion Chambers convert liquid CO2 over to gas in your marker for more consistent operation.
