The Equalizer is a tournament legal board for Tippmann's A5 and Pro-E markers. This board has been approved for use by Tippmann, which means that by using this board you will not void the warranty of your marker. This upgrade board increases the rate of fire and offers numerous other features. The Equalizer uses highly sophisticated algorithms for calculating the optimal cycle timing and handling issues of marker recoil due to a "sear tripper" design. There are no dip switches. All settings are stored internally. Dwell, Debounce(tm), rate of fire cap, and firing mode can be programmed using the trigger and LED. Firing modes include semi-auto, PSP ramping, and NXL full auto. Rate of Fire: Approximately 25+ bps
A5 E-Grip: Electronic Grip System. The E-Grip system uses an electronic control board to activate a solenoid. When activated, the solenoid disengages the sear, which in turn fires the marker. The System is powered by a concealed 9 Volt Battery. All electronic components are completely contained inside the grip, which allows you to quickly and easily change grips.
INCLUDED - WICKED AIR SPROTZ WAS BOARD
The Equalizer is a tournament legal board for Tippmann's A5 and Pro-E markers. This board has been approved for use by Tippmann, which means that by using this board you will not void the warranty of your marker. This upgrade board increases the rate of fire and offers numerous other features. The Equalizer uses highly sophisticated algorithms for calculating the optimal cycle timing and handling issues of marker recoil due to a "sear tripper" design. There are no dip switches. All settings are stored internally. Dwell, Debounce(tm), rate of fire cap, and firing mode can be programmed using the trigger and LED. Firing modes include semi-auto, PSP ramping, and NXL full auto. Rate of Fire: Approximately 25+ bps
DON'T FORGET TO ADD THE JC DUEL TRIGGER
Adjustable throw and sensitivity to increase pull speed. Take out trigger "bounce". Standard black anodized aluminum. Includes trigger, composite trigger guard, and hardware. blow back. But more importantly an internal o-ring to seal against the Power Tube. Allowing for a more consistent acceleration of the paintball. The Tippmann bolt and valve that comes standard in your marker is already a very efficient design. That's why most other aftermarket bolts don't do anything to improve the gun! The best, most cost effective way we've found to make it BETTER was to add the internal o-ring. Something nobody else has done..... Yet... Gas efficiency went up noticeably, not a huge leap, but we're happy. More importantly our testing showed a significantly tighter chrono grouping!
The bolt gained a plus / minus figure of 6 Feet per second over stock! This is the best 20 bucks you'll ever spend on your Tippmann. Our bolt fits both the Model 98 and the A5.
Electronic boards can not be returned for credit. Electronic boards are checked for damaged parts before they ship. Electronic boards can only be returned for exchange within 10 days after shipment. Most manufactures have warranties on there boards for problems that occur.
